July 21, 2017
July 21, 2017



​Every one of us owns precious files like personal documents, photos, videos, or audio files, and we typically store them all on hard drives. Few people realize that most electronic storage devices, including harddrive, have a rather limited lifetime when compared to the old school ways of storing information.

Since a majority of people today own laptops and external hard drives, which get dragged around quite a bit, a realistic hard drive lifetime is probably around 3 – 5 years.

​If you are unsure how much life is left on your hard drive, read this article to find out what signs may reveal an approaching failure.

1. Slowing Down Computer, Frequent Freezes, Blue Screen Of Death 

These are very unspecific signs that can be caused by a million different things. However, regardless of what the issue behind these symptoms is, it is recommended that you immediately make a backup. If these problems occur after a fresh installations or in Windows Safe Mode, it is almost certain that it is due to bad hardware, and possibly a failing hard drive.

2. Corrupted Data

If you’re beginning to find files that fail to open and are corrupted even though they saved without errors or if files suddenly disappear, you should get worried. While again this could be due to a multitude of issues, it is also a typical sign for a gradual hard drive failure.


3. Accumulation Of Bad Sectors

Bad sectors are areas of the hard drive that do not maintain data integrity. They are automatically masked by the operating system and thus hard to identify, especially if large amounts of the disk are currently in use. If you actually run into bad sectors, however, that certainly is a bad sign.
You can run a manual disk check to identify errors that Windows has not spotted, yet.

In Windows 7, go to > Start > Computer and right-click on the disk or partition you wish to check. Select > Properties, in the window that opens switch to the >Tools tab and click > Check now… In the Checking Disk window place a checkmark next to > Automatically fix file system errors and > Scan for an attempt recovery of bad sectors.

Windows will also check for bad sectors, when you perform a full format or chkdsk command. See this article – The Difference Between Windows Full Format & Quick Format [Technology Explained].















4. Strange Sounds

When you hear strange noises coming from your hard drive, it may be too late already. A repetitive sound also known as the click of death is caused by the head as it is trying to write data and recovers from errors in doing so. Grinding or screeching noises indicate that parts of the hardware, for example the bearings or spindle motor, are failing.

5. S.M.A.R.T. Data

There are tools that aim to predict hard drive failure by reading the S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) data that is recorded by the operating system. Unfortunately, like most other methods listed above, S.M.A.R.T. is notoriously unreliable in predicting hard drive failure and the catastrophe will often happen before the warning of S.M.A.R.T. kicks in. If you have a working hard drive, however, and would like to have a look at its S.M.A.R.T. data, check out this article – 4 Tools To Predict and Prevent Hard Drive Failure



Do not rely on signs or software to tell you whether you have a failing hard drive. It is more likely than not that it will fail unexpectedly and without any warning signs whatsoever. Rather than trying to forecast something that is even less predictable than the weather, you should rely on backups.
What is your worst hardware failure nightmare, did it ever happen to you, and did you actually lose any data?